The valve port type dry powder automatic packaging machine is specially designed and developed by our company to meet the market demand. According to different dry powder mortar production lines, we can provide three different types of packaging machines: impeller type, air blowing type and air floating type, which are suitable for packaging of all valve pockets including peritoneal bags. Packing weight 10-50 kg, fast packing speed (up to 300 bags / hour), high weighing accuracy, high degree of automation (computer intelligent automatic identification), and simple operation. Only manual insertion of the bag can complete the entire process of weighing and packaging. It not only saves manpower, but also reduces the labor intensity of workers, greatly reducing production costs and greatly improving production efficiency.
When the equipment is powered on, driven by the motor, the impeller is driven to rotate at high speed by the belt pulley, so that a negative pressure is formed in the ash discharge mechanism of the packaging machine. At the same time, at the feed inlet, the material leaks to the feed inlet due to the effect of gravity. The dry mortar material is sent out through the ash outlet to complete the complete packaging process. At this time, when the weight of the material reaches the preset weight (You can adjust the set weight by adding weights or setting an automatic controller.), The signal of the travel switch or sensor will be compared with a feedback. At this time, the solenoid valve works, closes the discharge port, stops filling and automatically passes through the automatic bag dropping device. Drop the bag or loosen the clamping device at the pocket to implement manual bag drop.
Scope of application:
It is suitable for automatic packaging of powder, flake, fine granular, powdery materials with high viscosity. Such as: gypsum powder, kaolin, cement, sand, dry powder mortar and slag.
Valve port packing machine technical parameters:
1. Quantitative range: 10 ~ 50KG
2. Packaging speed:> 7 tons / hour (determined by the specific gravity and viscosity of the material)
3. Packaging error: ± 0.2%
4. Working pressure: 0.5 ~ 0.7Mpa
5. Main machine power: <5.5KW
6. Power supply: 380V 50HZ